Land cover classification for Puget Sound, 1974-1979

Digital analysis of LANDSAT data for land cover classification projects in the Puget Sound region is surveyed. Two early rural and urban land use classifications and their application are described. After acquisition of VICAR/IBIs software, another land use classification of the area was performed, and is described in more detail. Future applications are considered

Thermal control system for a spacecraft modular housing

The development of a thermal control system for a spacecraft module is discussed. The wall structures are composed of superinsulation in some cases and of thermally conductive material in other cases. Heat pipes are installed to provide a path of heat transfer from the interior of the module to space. The design of the system makes it possible to maintain a relatively uniform temperature throughout the module with side variations of the amount of heat dissipated by the components within the module

Pegasus thermal design

Electronic and micrometeoroid detector panels for Pegasus thermal desig

The 1980 land cover for the Puget Sound region

Both LANDSAT imagery and the video information communications and retrieval software were used to develop a land cover classifiction of the Puget Sound of Washington. Planning agencies within the region were provided with a highly accurate land cover map registered to the 1980 census tracts which could subsequently be incorporated as one data layer in a multi-layer data base. Many historical activities related to previous land cover mapping studies conducted in the Puget Sound region are summarized. Valuable insight into conducting a project with a large community of users and in establishing user confidence in a multi-purpose land cover map derived from LANDSAT is provided

Gamble mode: Resonance contact mode in atomic force microscopy

Active noise reduction has been accomplished in atomic force microscopy by applying a high frequency, low amplitude vibration to the cantilever while it is in contact with a surface. The applied excitation (>~ 200 kHz; ~ 1 nm) is acoustically coupled to the tip and dampens the resonance Q factors of the system. The applied frequency is well above the bandwidth of the acquisition system (50 kHz). We call this mode "gamble mode" or "resonance contact.

Noise reduction in atomic force microscopy: Resonance contact mode

Noise reduction has been accomplished in atomic force microscopy by applying a high frequency, low amplitude vibration to the cantilever while it is in contact with a surface. The applied excitation (>~200 kHz; ~1 nm) is acoustically coupled to the tip and dampens the resonance Q factors of the system. The applied frequency is well above the bandwidth of the acquisition system (50 kHz). We call this mode "resonance contact" mode. The nonlinear behavior of the tip–sample interaction allows the high frequency excitation to effectively broaden the frequency response of the system resonances

A Unified Treatment of Horizontal Direct Investment, Vertical Direct Investment, and the Pattern of Trade in Goods and Services

This paper contributes to research endogenizing multinational firms in general-equilibrium trade models. We attempt to integrate separate contributions on horizontal multinationals which produce the same final product in multiple locations, with work on vertical multinationals, which geographically fragment production by stages. Previously derived results now emerge as special cases of a more general model. Vertical multinationals dominate when countries are very different in relative factor endowments. Horizontal multinationals dominate when the countries are similar in size and in relative endowments, and trade costs are moderate to high. In some cases, foreign investment or trade liberalization leads to a reversal in the direction of trade. Investment liberalization can also lead to an increase in the volume of trade and produces a strong tendency toward factor-price equalization. Thus direct investment can be a complement to trade in both a volume-of-trade sense and in a welfare sense.

An On-the-Road Comparison of In-Vehicle Navigation Assistance Systems

We compared system performance and driver opinion of 3 in-vehicle navigation aids - two advanced traveler information systems (ATISs; Ali-Scout and TetraStar) and written instructions - when used on the road concurrently under identical conditions. Few drivers in the study had difficulty finding initial routes or became lost. Users of Ali-Scout, an ATIS that utilizes traffic information in routing, drove longer-distance routes, got lost more frequently, and gave their system less positive ratings than did TetraStar users. Users of the 2 ATISs traversed routes that were significantly shorter in duration than those driven by users of written instructions. The time savings benefit of the advanced technology systems over written instructions was greatest during peak traffic conditions. Drivers who were familiar with the road network, overall, had less difficulty finding destinations and drove shorter-duration routes than drivers who were unfamiliar with the road network. Actual or potential applications of this research include improving the design of technologies that provide navigation assistance to travelers.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67382/2/10.1518_001872099779591222.pd

Carbon-nitrogen feedbacks in the UVic ESCM

A representation of the terrestrial nitrogen cycle is introduced into the UVic Earth System Climate Model (UVic ESCM). The UVic ESCM now contains five terrestrial carbon pools and seven terrestrial nitrogen pools: soil, litter, leaves, stem and roots for both elements and ammonium and nitrate in the soil for nitrogen. Nitrogen cycles through plant tissue, litter, soil and the mineral pools before being taken up again by the plant. Biological N<sub>2</sub> fixation and nitrogen deposition represent external inputs to the plant-soil system while losses occur via leaching. Simulated carbon and nitrogen pools and fluxes are in the range of other models and observations. Gross primary production (GPP) for the 1990s in the CN-coupled version is 129.6 Pg C a<sup>−1</sup> and net C uptake is 0.83 Pg C a<sup>−1</sup>, whereas the C-only version results in a GPP of 133.1 Pg C a<sup>−1</sup> and a net C uptake of 1.57 Pg C a<sup>−1</sup>. At the end of a transient experiment for the years 1800–1999, where radiative forcing is held constant but CO<sub>2</sub> fertilisation for vegetation is permitted to occur, the CN-coupled version shows an enhanced net C uptake of 1.05 Pg C a<sup>−1</sup>, whereas in the experiment where CO<sub>2</sub> is held constant and temperature is transient the land turns into a C source of 0.60 Pg C a<sup>−1</sup> by the 1990s. The arithmetic sum of the temperature and CO<sub>2</sub> effects is 0.45 Pg C a<sup>−1</sup>, 0.38 Pg C a<sup>−1</sup> lower than seen in the fully forced model, suggesting a strong nonlinearity in the CN-coupled version. Anthropogenic N deposition has a positive effect on Net Ecosystem Production of 0.35 Pg C a<sup>−1</sup>. Overall, the UVic CN-coupled version shows similar characteristics to other CN-coupled Earth System Models, as measured by net C balance and sensitivity to changes in climate, CO<sub>2</sub> and temperature

Pennsylvania Folklife Special 1960 Festival Issue

• Plain Dutch and Gay Dutch: Two Worlds in the Dutch Country • Pennsylvania Dutch • Displaced Dutchmen Crave Shoo-flies • Hex Signs: A Myth • Lebanon Valley Date Stones • Antiques in Dutchland • Antique or Folk Art: Which? • Folk Festival Program • Religious Patterns of the Dutch Country • The Costumes of the Plain Dutch • Love Feasts • Horse-and-Buggy Mennonites • The Courtship and Wedding Practices of the Old Order Amishhttps://digitalcommons.ursinus.edu/pafolklifemag/1008/thumbnail.jp